 |
 |
 |
|
2' x 6' Custom Double Sided Banner - 18 oz Blockout
Our 2' x 6' double sided banners are one 18 oz blockout banner printed full color on both sides, so drivers and foot traffic see your message coming and going. The blockout core keeps the back print from showing through, even with the sun behind it.
Hang it from a pole, between two posts, or over a walkway. Every banner comes with welded hems on all sides and metal grommets every 2 feet unless you choose pole pockets or a different grommet layout.
Orientation: Horizontal or vertical.
Material: 18 oz blockout vinyl, indoor and outdoor.
Mounting Options: Metal grommets (every 2 ft all sides, top and bottom, left and right, or corners only), pole pockets, or wind slits.
Pole Pockets: Optional 2", 3" or 4" pockets, top only or top and bottom.
Printing: Double sided full color. Send one file for each side, or one file to print the same on both.
Logos/Artwork: Send us a fully designed banner or let our graphic department send you proofs based on your logo and banner requirements. No charge for layout unless it involves recreating a complex logo. Once the order is placed, reply to the order confirmation email and attach your artwork.
File Formats: Vector art works best in .eps, .ai or .pdf. You can also send a file at no less than 150 dpi at full size: .jpg, .png, .tiff.
Production Time: Fast production, 1-2 business days after your art is approved. Please let us know if you need expedited production.
Banner options explained
- Which grommet layout should I pick? Grommets are metal rings set into the hemmed edge for rope, zip ties or hooks. Every 2 feet on all sides is the standard for fences, railings and walls and keeps the banner flat. Pick 4 corners only for indoor walls or short-term use, top and bottom for hanging between two lines, or left and right for mounting between two posts.
- What are pole pockets for? A sewn sleeve across the top, or top and bottom, that a pole or rod slides through. Use them for banner stands, street pole brackets, parade poles or a weighted bottom rod that keeps the banner hanging straight. Pockets replace the hem on those edges.
- What size pole pocket do I need? A 2" pocket fits a pole up to 1" across, a 3" pocket fits up to 1.5" and a 4" pocket fits up to 2".
- Do I need wind slits? Wind slits are half-moon cuts that let wind pass through the banner. Pick them for building fronts, open lots and anywhere the banner hangs in steady wind. For long-term use on a fence or scaffold, a mesh banner handles wind better.
- What do webbing and D-rings add? A 1" polyester strap sewn into the hem on all sides keeps grommets from tearing out on large or long-term banners. D-rings add metal rings at the corners for hooks and bungees.
- When do I need rope in the hem? Rope sewn into the top, or top and bottom, hem is for hanging a long banner across a street or between buildings without relying on the vinyl edge.
- What are reinforced corners? Extra layers at the corners, where the most strain lands. Pick them for street banners and anything that stays up through a season.
- Who designs my banner? Send us a finished design, or our graphic department builds the layout from your logo and text. No charge for layout unless it involves recreating a complex logo.
- Will I see a proof before you print? Yes, when you pick Email Me a Proof under Proofs. Production starts after you approve the art and takes 1-2 business days.
- Can I reorder a banner I bought before? Yes. Under Previous Order Options, pick Repeat Previous Imprint Exactly, or Repeat With Changes, and enter your previous order number or date.
- Have a question or need a size not listed? Call us at 1-800-222-4041.
|
|
|
 |
|
 |
|
